Availability: | |
---|---|
Quantity: | |
MCHJT-2420-3628
The automatic glass cutting all-in-one machine absorbs a single piece of glass through a suction cup, carries large and thick pieces of glass which is placed approximately vertically on a glass shelf, and then converts the glass to a horizontal state by mechanical transmission, and then uses a cutting system to cut it. It solves the current situation of difficult, unsafe, large cutting errors and low production efficiency which are caused by the large and thick pieces of glasses.
The machine is simple and safe to operate, features with fast, high processing accuracy and labor saving. The control system of the loading mechanism is controlled by a microcomputer (PLC programmable controller), and the cutting system adopts a CNC numerical control operating system to make the entire control system reliable, simple and high automation.
The machine can walk in the workshop and rotate 360 degrees. The machine automatically locates the angle and position of the glass and integrates linear cutting and heterosexual cutting. From the film loading to the cutting, it is fully controlled. The equipment adopts the latest generation control system, which truly realizes the linkage between the equipment and the computer, with high accuracy and fast speed. The cutting machine has a series of latest functions such as automatic laser positioning and graphic scanning. The glass is automatically typeset, and the profile is scanned automatically, thereb eliminating manual CAD measurement and drawing. The machine uses high-performance motors and gear racks to ensure the stability of the machine itself. The cutter wheel is imported from Germany with a high hardness cutter wheel. The cutter head is equipped with a protection device to effectively prevent the cutter from colliding. The machine can be equipped with automatic labeling function and cymbal table to achieve assembly line operation.
Features
Panasonic Japan - Sensor
German Bohle - cutter head
Siemens - Electrical components
Two motor heads - Drive the cutting head
Whole machine is free to move, and 360-degree rotate
Suction cup has insufficient vacuum alarm device
Specifications
Technical Parameters | MCHJT-2420 | MCHJT3628 |
Dimensions | 3630*4700*1400mm | 3910*4700*1450mm |
Height of the Working Table | 850mm | 850mm |
Glass Max Processing Size | 2440*2000 | 3660*2800 |
Cutting Thickness | 2-19mm (air pressure control) | 2-19mm (air pressure control) |
Cutting Speed | 0-180m/min | 0-180m/min |
Voltage & air pressure | 380V/50HZ, 0.6MPA | 380V/50HZ, 0.6MPA |
Installed Power | 11.8 KW | 11.8 KW |
Net Weight | 3000KG | 3100KG |
Details Showing
|
| |
Steel Pipes | 8 mm thickness | CNC Processed PVC Platform |
|
|
|
Strong Body Structure | Annealed & Heat-treatment | Electrostatic Surface Painting |
|
|
|
Linear Guideway | Assembly Electric Wires | Organized Switch box |
Configuration
Item | Brand |
Optimization Software | Italy Optimal(Extra cost)/Made in China |
Cutting software | Beijing Brand – Made in China |
Control Card | Solid high Control Card – Made in China |
Servo motor | Improved with high accuracy – Made in China |
Reducer | China Brand |
Power | Taiwan Mean Well |
Edge patrol sensor | Panasonic |
Photoelectric sensor | Carlo Gavazzi |
Super Flex Cable | China Brand |
Relay | Siemens, Germany |
AC contactor | Delixi |
Heat protector | Delixi |
breaker | Delixi |
time delay relay | Delixi |
Cutter box | China Brand |
Proportional valve | Japan SMC |
glass cutter head | Bohle |
Cylinder | AirTAC |
Sucker Cup | China Brand |
Inverter | China Brand |
Cutting head rotation bearing | NSK |
Cutting Finished Samples
Loading Pictures
Same quality, better price!
Same price, better quality!
Welcome to Order!
The automatic glass cutting all-in-one machine absorbs a single piece of glass through a suction cup, carries large and thick pieces of glass which is placed approximately vertically on a glass shelf, and then converts the glass to a horizontal state by mechanical transmission, and then uses a cutting system to cut it. It solves the current situation of difficult, unsafe, large cutting errors and low production efficiency which are caused by the large and thick pieces of glasses.
The machine is simple and safe to operate, features with fast, high processing accuracy and labor saving. The control system of the loading mechanism is controlled by a microcomputer (PLC programmable controller), and the cutting system adopts a CNC numerical control operating system to make the entire control system reliable, simple and high automation.
The machine can walk in the workshop and rotate 360 degrees. The machine automatically locates the angle and position of the glass and integrates linear cutting and heterosexual cutting. From the film loading to the cutting, it is fully controlled. The equipment adopts the latest generation control system, which truly realizes the linkage between the equipment and the computer, with high accuracy and fast speed. The cutting machine has a series of latest functions such as automatic laser positioning and graphic scanning. The glass is automatically typeset, and the profile is scanned automatically, thereb eliminating manual CAD measurement and drawing. The machine uses high-performance motors and gear racks to ensure the stability of the machine itself. The cutter wheel is imported from Germany with a high hardness cutter wheel. The cutter head is equipped with a protection device to effectively prevent the cutter from colliding. The machine can be equipped with automatic labeling function and cymbal table to achieve assembly line operation.
Features
Panasonic Japan - Sensor
German Bohle - cutter head
Siemens - Electrical components
Two motor heads - Drive the cutting head
Whole machine is free to move, and 360-degree rotate
Suction cup has insufficient vacuum alarm device
Specifications
Technical Parameters | MCHJT-2420 | MCHJT3628 |
Dimensions | 3630*4700*1400mm | 3910*4700*1450mm |
Height of the Working Table | 850mm | 850mm |
Glass Max Processing Size | 2440*2000 | 3660*2800 |
Cutting Thickness | 2-19mm (air pressure control) | 2-19mm (air pressure control) |
Cutting Speed | 0-180m/min | 0-180m/min |
Voltage & air pressure | 380V/50HZ, 0.6MPA | 380V/50HZ, 0.6MPA |
Installed Power | 11.8 KW | 11.8 KW |
Net Weight | 3000KG | 3100KG |
Details Showing
|
| |
Steel Pipes | 8 mm thickness | CNC Processed PVC Platform |
|
|
|
Strong Body Structure | Annealed & Heat-treatment | Electrostatic Surface Painting |
|
|
|
Linear Guideway | Assembly Electric Wires | Organized Switch box |
Configuration
Item | Brand |
Optimization Software | Italy Optimal(Extra cost)/Made in China |
Cutting software | Beijing Brand – Made in China |
Control Card | Solid high Control Card – Made in China |
Servo motor | Improved with high accuracy – Made in China |
Reducer | China Brand |
Power | Taiwan Mean Well |
Edge patrol sensor | Panasonic |
Photoelectric sensor | Carlo Gavazzi |
Super Flex Cable | China Brand |
Relay | Siemens, Germany |
AC contactor | Delixi |
Heat protector | Delixi |
breaker | Delixi |
time delay relay | Delixi |
Cutter box | China Brand |
Proportional valve | Japan SMC |
glass cutter head | Bohle |
Cylinder | AirTAC |
Sucker Cup | China Brand |
Inverter | China Brand |
Cutting head rotation bearing | NSK |
Cutting Finished Samples
Loading Pictures
Same quality, better price!
Same price, better quality!
Welcome to Order!
Home | Products | News | About Us | Contact Us | Privacy Policy